Filter
Top Products
Replacing a Disk (Regional Office) 401
Example Output From the vcx-os-query Command
OS Version Partition Label Status
A 3.3.0 /dev/sda2 / active
B 3.3.1 /dev/sda3 /B
In the example, the active operating system version is 3.3.0 and the
version in the inactive partition is 3.3.1.
f Switch to the more recent version of the operating system using this
command:
vcx-os-switch 3.3.1
4 Reboot the down server using this command:
reboot
Configuration of VCX Services
After the reboot process has been completed, configure VCX services on
the down server using this command:
vcx-setup
The script detects that you have already configured the networking
parameters for the server and prompts you to configure VCX services.
Follow the instructions in “Configuring a Primary Authentication and
Directory Server” in Chapter 7.
After VCX Services have been configured, this message appears.
Please wait while the wizard completes.
The script displays several status messages and exits.
Final Configuration of the Authentication and Directory Server
1 For each branch office that is associated with the local regional office,
configure the VCX Firewall software to permit Oracle access. For
example, to configure access for four branch offices with IP addresses
10.50.101.5 through 10.50.104.5, use these commands:
modfw -p oracle allow 10.50.101.5
modfw -p oracle allow 10.50.102.5
modfw -p oracle allow 10.50.103.5
modfw -p oracle allow 10.50.104.5