Filter
Top Products
145
Sample Services Configuration Script — Branch Office IP Messaging Server (continued)
The site ID is a unique value which identifies a particular site in a
multi-site VCX installation. It is a string of up to 22 characters,
consisting of letters and/or numbers. No punctuation characters, spaces,
or tabs may be used.
Enter a unique identifier for this site :
Enter an identifier for the branch office in which this server will reside.
The Customer Name identifies the company using this VCX system.
Enter the customer name :
Enter the name of your company.
Some VCX applications can use European date ordering. Answer 'Y' here to
enable this.
Use European date order? (Y/N) [N] :
Press the Enter or Return key to accept the default answer (N). To use the
European date order, enter Y.
The SIP default dialing domain is used to construct the SIP URI for
outbound SIP requests.
Enter the SIP default dialing domain : 1.1.1.1
VCX systems require 1.1.1.1 as the default dialing domain. Press the
Enter or Return key to accept the default value.
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor :
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server in your VCX
system.
The secondary Call Processor acts as a backup if the primary is down or
unreachable.
IP address of the secondary Call Processor :
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary Call Processing Server in your
VCX system.