3Com V7000 Telephone User Manual


 
Telephone Installation 243
d Use the up and down arrow buttons to scroll through the list of
options.
e When the selection dot is beside Configure IP Address, press the
Select button, located below the word Select in the display panel.
f Enter the IP address that you want to assign to the telephone.
g To save the new setting, press the Save button, located below the
word Save in the display panel.
3 Configure the Subnet mask for the network segment to which the
telephone is connected.
a Press the Feature button located under the word Feature in the
telephone display panel.
b Use the up and down arrow buttons to scroll through the list of
options.
c When the selection dot is beside User Configurations, press the
Select button, located below the word Select in the display panel.
d Use the up and down arrow buttons to scroll through the list of
options.
e When the selection dot is beside Configure Subnet Mask, press the
Select button, located below the word Select in the display panel.
f Enter the subnetwork mask appropriate for the subnetwork to which
the telephone is connected.
g To save the new setting, press the Save button, located below the
word Save in the display panel.
4 Configure the gateway address for the network segment to which the
telephone is connected.
a Press the Feature button located under the word Feature in the
telephone display panel.
b Use the up and down arrow buttons to scroll through the list of
options.
c When the selection dot is beside User Configurations, press the
Select button, located below the word Select in the display panel.
d Use the up and down arrow buttons to scroll through the list of
options.