Filter
Top Products
Configuration Files 327
Sample Media Gateway Configuration File (continued)
GWDEBUGLEVEL = 5
Specify the level of logging when in debug mode. Possible values are:
■ 0 — Debug is disabled (default)
■ 1 — Flow debugging is enabled
■ 2 — Flow and device interface debugging are enabled
■ 3 — Flow, device interface and stack interface debugging are enabled
■ 4 — Flow, device interface, stack interface and session manager
debugging are enabled
■ 5 — Flow, device interface, stack interface, session manager and
device interface expanded debugging are enabled.
ENABLEPROXYKEEPALIVE = 1
Enable (1) or disable (0, default) the ability of the Media Gateway to send
a keep alive signal to the proxy server. The frequency with which the
signal is sent is controlled by the ProxyKeepAliveTime value.
ENABLEEARLYMEDIA = 1
Enable (1) or disable (0, default) the ability of the Media Gateway to send
a 183 Progress response with the SDP, allowing a media stream to be set
up prior to the time that the call is answered. If this feature is disabled,
the call rings immediately.
PROXYNAME = '1.1.1.1'
Enter the host part of the SIP URI for any FXS endpoint. For example, if
the SIP URI is sip:1000@1.1.1.1, enter 1.1.1.1 as the PROXYNAME.
VCX systems use the dialing domain as the host part of the SIP URI. 3Com
recommends that customers use 1.1.1.1 as the dialing domain for all VCX
servers.
SIPGATEWAYNAME = '1.1.1.1'
Enter the host part of the SIP URI for any FXS endpoint. For example, if
the SIP URI is sip:1000@1.1.1.1, enter 1.1.1.1 as the SIPGATEWAYNAME.
VCX systems use the dialing domain as the host part of the SIP URI. 3Com
recommends that customers use 1.1.1.1 as the dialing domain for all VCX
servers.