3Com V7000 Telephone User Manual


 
137
Sample Services Configuration Script — Secondary IP Messaging Server (continued)
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String : public
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String : private
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.
The Read Community String specifies the community string to be used by a
management station when sending read requests to this system.
Read Community String : public
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next. Authorized management stations can
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N] :
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. The script will then accept
the IP addresses of up to four network management stations.
Do you wish to change any of the Common Agent parameters? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.