3Com V7000 Telephone User Manual


 
248 CHAPTER 9: INSTALLING DEVICES
Verify that the Attendant Console has been discovered by the VCX
system
Perform the remaining configuration of the Attendant Console
Associate the Attendant Console with a particular phone
For instructions on how to perform these tasks, see the VCX
Administration Guide.
Gateway
Installation
3Com V7111 Analog
Gateways
V7111 Analog Gateways connect the VCX system in two directions:
FXO versions connect to analog trunk lines from the Public Switched
Telephone Network (PSTN).
FXS versions connect to analog telephones or fax machines.
There are 4-port and 8-port FXO versions of the V7111.
There are 2-port, 4-port, and 8-port FXS versions of the V7111.
To configure any V7111 analog gateway, use a browser to connect to the
gateway. Read and follow the instructions in the 3Com VCX V7111 Fast
Track Installation Guide.
FXO Gateways FXS Gateways
Default IP Address
10.1.10.11 10.1.10.10
Default Subnetwork Mask
255.255.0.0 255.255.0.0
Default Network Gateway IP Address
10.1.10.254 10.1.10.254
You may need to configure the IP settings on your PC to initially connect
to the gateway. After you have connected, use the browser interface to
configure the IP settings of the gateway to conform to your network and
connect the gateway to the VCX Call Processing Server.
3Com V7122 Digital
Gateways
V7122 Digital Gateways connect the VCX system to digital (T1) services
from the Public Switched Telephone Network (PSTN). Different models of
the V7122 gateway provide connection to 1, 2, 4, 8, or 16 T1 trunks.