3Com V7000 Telephone User Manual


 
244 CHAPTER 9: INSTALLING DEVICES
e When the selection dot is beside Configure Gateway IP Address,
press the Select button, located below the word Select in the display
panel.
f Enter the IP address of the gateway for the network segment to which
the telephone is connected.
g To save the new setting, press the Save button, located below the
word Save in the display panel.
5 Disconnect and reconnect the telephone power cord.
The telephone contacts the Primary Call Processing Server and begins to
download the appropriate software.
During the downloading process, several progress messages appear in
the telephone display panel. After the software has been downloaded to
the telephone, the message “Local Phone Number:” appears.
To log in on the telephone, a user enters:
An extension number, followed by #
A numeric password, followed by #
Software
Application
Installation
3Com Complement
Attendant Software
The Complement Attendant Console is a software application that you
install on a PC that is running Windows 98, Windows 2000, or Windows
XP software. After the software has been installed, you must configure
the IP parameters so that the software can connect to the VCX Call
Processing Server.
For additional information about using the Complement Attendant
Software, see the Help provided within the application.
To install the Complement Attendant Software on a PC:
1 Download the appropriate file from the 3Com Partner Access web site
and save it in a directory that you choose.
2 Double click the VCXCAS.exe file to start the installation wizard.
3 Follow the prompts to install the software.