3Com V7000 Telephone User Manual


 
ISC Server 345
Sample DHCP Configuration File (continued)
option routers 10.10.21.254;
The previous line defines the IP address of the network router for the
branch office. Typically, router addresses end in either 1 or 254.
CHANGE FOR EACH BRANCH: Change this IP address to match the
network parameters of the branch office.
option broadcast-address 10.10.21.255;
The previous line defines the broadcast IP address for the branch office
network.
CHANGE FOR EACH BRANCH: Change this IP address to match the
network parameters of the branch office.
option subnet-mask 255.255.255.0;
The previous line defines the subnetwork mask for the branch office
network.
CHANGE FOR EACH BRANCH: Most likely, the same subnetwork mask
is used in each of the branch offices. Change this setting only if branch
offices use different subnetwork masks.
option vendor-class-identifier "Mediant-1000";
The previous line defines the vendor class identifier string that the PSTN
gateway sends when it transmits a DHCP request.
option host-name "gateway_branch21";
The previous line defines the host name to be assigned to the PSTN
gateway.
NOTE: These host names are not posted to any DNS servers.
CHANGE FOR EACH BRANCH: The host name must be unique for each
branch office PSTN gateway.
option bootfile-name "/tftpboot/gatway21.ini";
The previous line defines the path to the initialization file for the PSTN
gateway. The path on your TFTP server may be different and the file name
is your choice.
CHANGE FOR EACH BRANCH: Each branch office is configured slightly
differently, and each PSTN gateway must have a unique configuration file
on the TFTP server.