3Com V7000 Telephone User Manual


 
Telephone Installation 239
10 Press 6 (VCX Cnfig Menu).
11 Press 1 (Alt Dnld Servr).
12 Enter the IP address of the Alternate Call Processing Server.
13 Press # to save the Alternate Call Processing Server setting.
14 Connect the Ethernet data cable to the telephone.
15 Disconnect and reconnect the telephone power cord.
The telephone:
Obtains an IP address from a DHCP in your network.
Contacts the Primary Call Processing Server and begins to download
the appropriate software.
During the downloading process, several progress messages appear in
the telephone display panel. After the software has been downloaded to
the telephone, the message “Local Phone Number:” appears.
After the telephone finishes the download process, enter the dialing
domain for the telephone.
1 Press the Program button, located below the up and down arrow
buttons.
2 Press 5 (Advanced Settings).
3 Press 3 (Set Dialing Domain).
4 Enter the default dialing domain (001.001.001.001).
5 Press the # key to save the dialing domain setting.
To log in on the telephone, a user enters:
An extension number, followed by #
A numeric password, followed by #
To assign a telephone extension to a user, you must configure the
telephone extension number and user ID using the VCX Administrator
User Interface. For information about how to perform these tasks, refer
to the VCX Administration Guide.