264 CHAPTER 9: INSTALLING DEVICES
4 Connect a 3Com power adapter to an AC power outlet.
5 Connect the other end of the power adapter cable to the power
connector on the underside of the 3105 Attendant Console.
6 Use a terminal emulation program such as Hyperterm to connect to the
serial port on your PC. The configuration is:
■ 9600 baud
■ 8 data bits
■ 1 stop bit
■ No parity
■ No flow control
7 In the Hyperterm window, enter this command, substituting the one- or
two-digit VLAN ID number for XY:
VcxSetVlanConfig XY
V7111 and V7122 Gateways
You cannot configure V7111 or V7122 gateways to operate on a VLAN.