Filter
Top Products
Configuration Files 311
Sample vcx-createcfg Script (continued)
Please enter the role of this system:
1 - This is a regional office, primary IP Telephony server.
2 - This is a regional office, secondary IP Telephony server.
3 - This is a branch office IP Telephony server.
4 - This server operates standalone.
Enter your choice by number [1] : 3
This sample script creates a configuration file for a branch office IP
Telephony Server.
Services running on this system need to communicate with other systems and
devices in order to operate. In the next series of questions, you will be
asked for information about these, and for other global parameters.
VCX systems can have one or two IP addresses. If the system has or will use
only a single Ethernet interface, enter its IP address here. If the system
has two Ethernet interfaces and both will be used, enter the IP address of
the first one here.
Enter the system's first IP address :
Servers in branch offices have only only one Ethernet interface (eth0)
enabled. Enter the IP address of eth0.
If the VCX system has two Ethernet interfaces and both will be used, enter
the IP address of the second one here. If the system has a single interface
or only one will be used, leave this entry blank.
Enter the system's second IP address :
Servers in branch offices have only only one Ethernet interface (eth0)
enabled. Press the Enter or Return key to indicate that eth1 is not enabled
and has no IP address.
The site ID is a unique value which identifies a particular site in a
multi-site VCX installation. It is a string of up to 22 characters,
consisting of letters and/or numbers. No punctuation characters, spaces,
or tabs may be used.
Enter a unique identifier for this site :
Enter an identification string for the site at which the IP Telephony server
is located.