Filter
Top Products
Glossary
board assignment
board renumbering
bus
button
byte
C
Call Accounting
System
Call Accounting
Terminal
Caller ID
SPM procedure for assigning line/trunk and extension
modules to slots on the control unit.
System programming procedure for renumbering
line/trunk and extension modules that have already been
assigned to specific slots on the control unit.
Multiconductor electrical path used to transfer information
over a common connection from any of several sources to
any of several destinations.
Key on the face of a telephone that is used to access a
line, activate a feature, or enter a code on a
communications system.
Sequence of bits (usually eight) processed together. Also
called “octet.”
See CAS.
See CAT.
In Release 3.0 and later, a system feature that supports a
caller identification service provided by some local
telephone companies (if local regulations allow) supplying
the calling party telephone number. An 800 GS/LS-lD
module on the system can capture this information and
display it on the screens of MLX telephones. See also ANI.
Calling group
Team of individuals who answer the same types of calls.
Call Management
See CMS.
System
GL–6 Maintenance and Troubleshooting