AT&T 3.0 Telephone User Manual


 
Error Logs
Table 2-2
Continued
Error
Codes Description
Action
7806
NOT IN STANDBY MODE:
Reset the board. If problem persists,
Reported during cold start or
troubleshoot the module.
background check.
7807
SELF TEST NOT COMPLETER
Reset the board. If problem persists,
Reported during cold start.
troubleshoot the module.
7808 TEST RESULT REGISTER BAD:
A module error or processor error
Reset the board, If problem persists,
troubleshoot the module.
resulted while running test.
7809
TEST STATUS REGISTER BAD:
Reset the board. If problem persists,
A module error or processor error
troubleshoot the module.
resulted while running test.
780A
DPR TEST NOT COMPLETED:
If problem persists, troubleshoot the
Reported during cold start.
module.
780C
RAM TEST FAILURE:
If problem persists, replace the
Memory failed the RAM test. Turns
processor.
on the processor LED.
780D
UPPER ROM FAILURE:
If problem persists, replace the
Memory failed the ROM test. Turns
processor.
on the processor LED.
780E
LOWER ROM FAILURE:
If problem persists, replace the
Memory failed the ROM test. Turns
processor.
on the processor LED.
Continued on next page
2-14 Error Logs, Access Logs, and System Inventory