Filter
Top Products
Testing the System
2 Make an announcement into the handset.
You should hear the announcement over the loudspeaker(s).
3 Hang up.
4 Repeat Steps 1 through 3 for all paging zones.
Testing Music On Hold
1
2
3
4
5
6
To verify that music is provided to outside callers placed on hold, follow the
steps below. Inside callers do not hear Music On Hold.
Pick up the handset at the test telephone.
Dial the central office trunk access code and the system’s published
directory number; or, if you are using a DID trunk, dial any extension.
At the destination extension, answer the incoming call.
At the destination extension, press the Hold button.
The line button’s green LED should flash.
Verify that music is heard at the destination extension and adjust the
volume as required.
Hang up.
NOTE:
If the customer uses equipment that rebroadcasts
materials, the customer may be required to obtain
music or other copyrighted
a copyright license and
pay license fees from a third party such as the American Society of
Composers, Artists, and Producers (ASCAP) or Broadcast Music Incorporated
(BMI). Or the customer can purchase a Magic on Hold system, which does
not require the customer to obtain such a license, from an AT&T
representative.
Initializing and Testing the System
7–17