Conclusion of Hardware Maintenance
After about four minutes, check the error logs.
■
If new PRI errors occur, contact your technical support organization for
help on interpreting the results and your action.
■
If no new PRI messages appear, the ends are most likely in
agreement.
The screen below appears when the message cannot be sent.
Console Display/Instructions
Additional Information
PC
BChannel xxxx Audit call
xxxx = slot and port number entered
in Step 3.
Audit Failed
Exit
If this occurs, make sure an active call is in progress on the specified
B-channel and try the audit again.
Conclusion of Hardware
Maintenance
Installing the Control Unit
Housing (Release 2.1 or Later)
After you have completed maintenance and troubleshooting on Release 2.1 or
later, follow the steps below to reinstall the control unit housing.
Installing the Top Cover
To install the top cover, see Figure 5-1 and follow these steps.
1 Be sure the cords have been pressed through the wire managers at the
base of the modules.
5–30 Central Office Problems
