AT&T 3.0 Telephone User Manual


 
Testing the System
6 At any telephone, pickup the handset and dial the group extension
number.
7 Test the calling group delay announcement (if provided) for each group.
a Make the group busy or have all members log out of the group (by dialing
#*44
at each group extension).
b Repeat Step 2.
c After listening to the delay announcement, hang up.
d Repeat these steps for each group.
8 At the ringing telephone, have someone pickup the handset and verify
that you have good two-way communication.
System Speed Dial Test
To test System Speed Dial numbers, follow the steps below:
1 Find out which numbers have been programmed for System Speed Dial.
See the system manager or use Form 10b as a reference for System Speed
Dial numbers.
2 From the test telephone, pickup the handset and dial a System Speed
Dial code.
Verify that you have good two-way communication and that the correct party
was reached.
Coverage Test
1
2
3
4
5
To verify that coverage is in effect, follow the steps below:
Have someone call the covered telephone.
Count the number of rings at the covered telephone before the covering
telephone starts ringing.
This should be the same as the programmed number of rings.
Pick up the handset at the covering telephone and verify that you have
good two-way communication.
Hang up the handset at the covering telephone.
Check both Individual and Group Coverage.
7–14
Initializing and Testing the System