Filter
Top Products
Initializing the System
Programming Guides
The following guides are available to assist you:
Programming Summary for quick-reference procedures (document
number 555-630-111)
System Programming for detailed procedures (document number 555-
630-140, in the binder accompanying this one)
System Programming and Maintenance (SPM) for detailed SPM
procedures (document number 555-630-140, in the binder
accompanying this one)
Restoring from the Translation Memory Card
1
2
If you received the Release 3.0 Translation memory card, follow the steps
below to initialize the system:
Perform a System Erase (frigid start).
See Maintenance and Troubleshooting for detailed instructions.
Console Procedure:
Menu
→
Maintenance
→
Slot
→
Dial or Type
00
→
Enter
→
Demand Test
→
System Erase
(Line 5, left button) twice
→
Yes
Use the programming console and the translation memory card to
perform the Restore procedure.
See Appendix D of Maintenance and Troubleshooting for instructions.
Restoring from the System
Programming Disk
If you received the Release 3,0 system programming disk, follow the steps
below to initialize the system:
1 Perform a System Erase (frigid start).
See Maintenance and Troubleshooting for detailed instructions.
Console Procedure:
Menu
→
Maintenance
→
Slot
→
Dial or Type
00
→
Enter
→
Demand Test
→
System Erase
(Line 5, left button) twice
→
Yes
7–2 Initializing and Testing the System