AT&T 3.0 Telephone User Manual


 
Index
H
Hardware supported, 8-1 - 8-2
Headsets, 3-27 - 3-29
Housing
installation, 9-17 - 9-18
removing, 9-3 - 9-6
replacing clips, 9-7 - 9-10
I
In-Range Out-of-Building (IROB)
protector, 3-59
Initializing the system
programming disk, 7-2 - 7-3
Translation memory card, 7-2
Installation
summary of tasks, 1-1 - 1 -2
system forms and, 1-2 - 1-4
Integrated Solution Ill (IS Ill)
hardware requirements, 8-14 - 8-15
overview, 8-13 - 8-14
procedure, 8-15
UNIX System-based products
supported, 8-2
Integrated Voice Response (IVR)
applications, 8-12
Intercom dial tone testing, 7-6
Interference, 2-3
IROB (in-Range Out-of-Building)
protector, see In-Range Out-of-
Building protector
IS Ill (Integrated Solution Ill), see
Integrated Solution III (IS Ill)
IVR (Integrated Voice Response)
applications, see Integrated Voice
Response (IVR) applications
K
Key mode
Release 2.0 and earlier, 9-16 - 9-17
modifying processor for, 9-1 0 - 9-1 3
L
Lightning protection, 2-14 - 2-15
Line jack labeling, 2-38
Loop-start trunk testing, 7-8
Loudspeaker paging
connection, 3-29
DTMF signaling, 3-30
multizone with background music,
Magic on Hold, and bidirectional
paging, 3-36 - 3-37
single-zone with customer-supplied
amplifier, 3-32
single-zone with Music on Hold, 3-36
single-zone with PagePac Plus, 3-31
single-zone with UPAM, 3-32 - 3-33
M
Magic on Hold, 3-35, 3-36 - 3-37
MERLIN Identifier, 3-34
MERLIN MAIL
hardware requirements, 8-19
overview, 8-17 - 8-19
ports required, 8-17
MERLIN PFC (Phone-Fax-Copier)
Behind Switch mode, 8-21
hardware requirements, 8-21 - 8-22
Hybrid/PBX and Key modes, 8-21
overview, 8-20 - 8-21
MFM (Multi-Function Module), see Multi-
Function Module(MFM)
Mirage headpiece, 3-27
IN-4 Installation