Filter
Top Products
Remote Programming Maintenance
Setting Up Equipment for Remote
Maintenance
1
2
3
To setup equipment for remote maintenance, follow the steps below while
referring to Figure 1–3 and to Installation.
Connect the PC and modem.
■ If you have an external modem, use an EIA-232-D cable.
■
If you have an internal modem, the connection is already established.
Use a D8W cord to connect the modem to a T/R trunk jack.
Use a D8W cord to connect the modem to a T/R telephone.
LINE jack
PHONE jack
EIA-232-D
EXTERNAL
MODEM
PC running SPM
T/R jack
D8W cord
\
D8W cord
T/R telephone
Figure 1-3. External Modem Setup
Introduction 1-7