![](http://pdfasset.owneriq.net/3/85/385194ee-e359-4e7e-ad27-34bc4dc71287/385194ee-e359-4e7e-ad27-34bc4dc71287-bgae.png)
Connecting a Printer to the Control Unit
Connecting a Printer Within 50 Feet (15.2 m)
If the printer is within 50 ft. (15.2 m) of the control unit and is connected to the
same 117-V AC branch as the control unit, use this procedure to connect a
printer to the control unit.
You need the following hardware for this procedure:
Z200A EMI filter
Adapter for the connector on the interface cable
– 355A for a male connector
– 355AF for a female connector
Installing the PC, CAT, or Printer 5-15