AT&T 3.0 Telephone User Manual


 
Module Problems
Console Display/Instructions
5 Select Test Once or Repetitive.
Demand Test Slot xx:
Board
aaaaaaaaaaaaaaaaa
Board Controller:
Test once
Repetitive
Exit
The screen below appears
module has a green LED, it
Demand Test Slot xx:
Board
aaaaaaaaaaaaaaaaa
Board Controller Test
in Progress
Exit
Additional Information
PC
xx = slot number entered in Step 2
(F2)
(F3)
while the test is running. At the same time, if the
flashes.
xx = slot number entered in Step 2
If you are running the repetitive test,
this screen remains until the test fails.
To interrupt repetitive testing, select
Exit.
(F5)
The screen below appears only if you selected
Test Once
and the module
passes the test.
Demand Test Slot xx:
Board aaaaaaaaaaaaaaaaa
Board Controller Test
Successfully Completed
Exit
xx = slot number entered in Step 2
The screen below appears when either test
(Once
or
Repetitive)
fails.
Demand Test Slot xx:
Board
aaaaaaaaaaaaaaaaa
Board Controller Test
FAILED
xxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Exit
xx = slot number entered in Step 2
Lines 5 and 6 show error messages.
If there are more than two messages,
select
More
to see them.
(PgUp)
4-52 Control Unit Problems