A SERVICE OF

logo

Connecting a Printer to the Control Unit
248B Adapter
2012D Transformer
Transformer
with 248B Adapter
D6AP Cord
Figure 5-7. Connecting the 24813 Adapter and the 201213 Transformer
9
10
11
Plug the other end of the D6AP cord into the 2012D-50M transformer.
If you are working with a 248B adapter and 2012D transformer instead of a
2012D-50M transformer, plug the D6AP cord into the jack on the 248B
adapter, and then connect the spade-tip wires on the 248B adapter to the
screws on a 2012D transformer. See Figure 5–7.
Plug the 40092 adapter into a wall jack, BRI A-4P adapter, 102
connecting block, or 103 connecting block.
Complete the 400B2 connection.
5–20
Installing the PC, CAT, or Printer