AT&T 3.0 Telephone User Manual


 
Error Logs
Checking Permanent Errors
Follow Steps 1 through 3 above for “Checking the Error Logs. ” In Step 3,
select
Permanent.
Console Display/Instructions
Additional Information
PC
Permanent Errors: >
xxxxxxxxxxxxxxxxxxxxxx
Slot xx Port xx
First mm/dd/yy
Last
mm/dd/yy
Code xxxx
Exit
count xxx
hh:mm
hh:mm
I
Press the
More
button to page
(PgUp)
through the permanent errors.
Press the
Drop
button to delete
(Alt)
+ (P)
an error log entry.
Line 2 provides a brief description of the error code identified on Line 6. For
more information on an error code, see Table 2–2.
Line 3 indicates the slot and port where the error was detected.
Line 5 indicates the error’s last occurrence.
NOTE:
Depending on which entry you delete, you might clear an alarm. See “Alarms”
in Chapter 1 for additional information about alarms.
Checking Transient Errors
Follow Steps 1 through 3 above for “Checking the Error Logs.” In Step 3,
select
Transient.
Transient Errors: >
xxxxxxxxxxxxxxxxmxxxxx
Slot xx Port xx Count xxx
First mm/dd/yy hh:mm
Last mm/dd/yy hh:mm
Code xxxx
Exit
Press the
More
button to page
(PgUp)
through the transient errors.
Press the
Drop
button to delete
an error log entry.
(Alt) + (P)
Line 2 provides a brief description of the error code identified on Line 6. For
more information on an error code, see Table 2–2.
Line 3 indicates the slot and port where the error was detected.
Line 5 indicates the error’s last occurrence.
2-4 Error Logs, Access Logs, and System Inventory