Filter
Top Products
Using SPM
Table 1–1
Continued
(Ctrl) + (F1)
(Ctrl) + (F5)
(Ctrl) + (F8)
(Ctrl) + (F9)
(Enter
↵
)
(
←
Bksp)
(Del)
(
↑ ↑
)(
↓ )(←↓ )(← )(→ )(→
)
n/a
n/a
n/a
n/a
Enter
Backspace
Delete
n/a
Help.
Display a help screen about SPM operations.
To exit from Help, press (End) .
Reset.
Reset the communications port. For
example, if the information on the screen is garbled,
try exiting from and then recentering the screen. If
the screen remains garbled, use (Ctrl) + (F5) to clear
the screen and return to the SPM Welcome screen.
Note that using (Ctrl) + (F5) drops the modem
connection.
Browse.
View print reports saved with Print Opts.
Escape to shell.
To use this key in sequence, you
must set DEBUG=1 in the SPM configuration file
ams.cfg. You can then use this key sequence to
execute DOS (or UNIX system) commands. To
return to SPM, type
exit.
This key on your PC can be used instead of (F10)
(Enter) when
Enter
appears as a choice in the 7-by-
24 console simulation window.
The (
←
Bksp) can be used instead of (F9) when it
appears as a choice in the 7-by-24 console
simulation window.
The (Del) key on your PC can be used instead of (F8)
(Delete) when it appears as a choice in the 7-by-24
console simulation window.
The up, down, left, and right arrow keys can be
used to highlight selections in a menu and to select
the 20 line buttons below the 7-by-24 console
simulation window.
1-14 Introduction