AT&T 3.0 Telephone User Manual


 
Index
Overview
installation sequence, 1-1 - 1 -2
programming, 1-4
adjuncts installation, 1-3
control unit installation, 1-3
data equipment connection, 1-4
network interface connection,
1-3 - 1-4
telephone installation, 1-3
system upgrade, 1-4
P
Paging
connection, 3-29
DTMF signaling, 3-30
multizone with background music,
Magic on Hold, and bidirectional
paging, 3-37
single-zone with background music
and Magic on Hold, 3-36
single-zone with customer-supplied
amplifier, 3-32
single-zone with PagePac Plus, 3-31
single-zone with UPAM, 3-33
testing, 7-16 - 7-17
PassageWay Direct Connect Solution
hardware and software
requirements, 8-23 - 8-24
overview, 8-22 - 8-23
Permanent Key mode, 9-10 - 9-13
Personal computer (PC)
more than 50 ft. from control unit
diagram, 5-6
hardware required, 5-4
procedure, 5-5 - 5-7
within 50 ft. of control unit
diagram, 5-3
procedure, 5-2
PFT (power failure transfer) jack, see
Power failure transfer (PFT) jack
Power
turning off, 2-44, 9-4
turning on, 2-43
Power failure transfer (PFT) jack testing,
7-18 - 7-19
Power requirements, 2-5 - 2-8
Power supply installation
copper shield, 2-20 - 2-21
ferrite cores, 2-22 - 2-24
power supply module, 2-22
ring generator, 2-19 - 2-20
turning power off, 2-20
Powering down the system, 2-44 , 9-4
Powering up the system, 2-43
Printers
DIP switch settings
applications printer, 5-25
AT&T 475/476 printer, 5-23 - 5-24
AT&T CAT printer, 5-24 - 5-25
more than 50 ft. from control unit
on
on
adapter, 5-17 - 5-21
diagram, 5-18 - 5-19
hardware required, 5-17 - 5-18
procedure, 5-19 - 5-21
outlet with CAT
diagram, 5-9 - 5-10
hardware required, 5-9
connections, 5-14 - 5-15
procedure, 5-9 - 5-10
outlet without CAT, 5-8 - 5-9
control unit connections,
5-12 - 5-13
hardware required, 5-11
options, 5-22 - 5-23
supported, 5-7 - 5-8
within 50 ft. of control unit, 5-16 - 5-17
diagram, 5-16 - 5-17
hardware required, 5-15
IN-6 Installation