AT&T 3.0 Telephone User Manual


 
\Using SPM
Using SPM
For more information on using SPM, see System Programming and
Maintenance.
Starting SPM
The procedure for accessing SPM differs slightly, depending on whether your
PC is connected directly or by modem to the control unit.
With a Direct Local Connection
1
2
3
4
To access SPM when your PC is connected directly to the control unit, follow
the steps below.
If you do not have a hard drive, insert the SPM diskette into Drive A and
switch to Drive A if it is not already the current drive.
Start the SPM program.
Type
SPM.
The SPM Welcome screen appears, as shown below.
Console Display/Instructions
Additional Information
PC
Press any key.
Welcome to SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue:
Version X.xx
If the main menu (see Step 4) does
not appear, or if the information on
the screen is garbled, press any key
again.
Select an option by pressing one of the function keys.
SPM Main Menu
Menu: Select Function
Sys Program
Maintenance
(F1)
(F2)
(F3)
(F4)
(F5)
Backup
Boards
Restore
Pass-Thru
(F6)
(F7)
(F8)
(F9)
(F10)
Print Opts Password
Monitor Language
1-8 Introduction