Filter
Top Products
System Management
General Information
This section tells you how to change the System Manager’s password, which is
required for changing voice messaging system settings. It also provides
information that you should share with all system users and other information
that is specifically for the receptionist at extension 10.
Changing Your Password
The factory setting for Iogin 99’s (the System Manager’s) Password is 1234.
To prevent unauthorized programming of the system, you should change the
default password immediately after installation or any time the password has
been reset. You can assign up to four digits for a Password. It is recommended
that you create a Password from random, non-sequential digits.
If you change the Password and forget it, you must contact the BCS Technical
Service Center at 1 800 628-2888 or call your Lucent Technologies’
Representative or local Authorized Dealer for instructions on how to reset the
Password.
To change the Password for login 99:
1.
2.
3.
4.
5.
6.
7.
Press [
Intercom
] [
7
] [
7
] [
7
] or the programmed VMMsgs button.
Press [
9
] [
9
] [
#
].
Enter the existing password (for example, 1234) and press [ # ].
Press [
5
] to change the password.
The prompt asks you to enter your new password.
Enter up to four digits for the new password and press [
# ].
The prompt asks you to re-enter your new password.
Enter your new password again followed by [
# ].
The new password is now active.
Hang up to quit.
5-2