Filter
Top Products
System Management
Modifying Line Ownership
Update Form 6 for the voice messaging system to show modifications to line
ownership; then use the updated form while performing the following
procedure.
To change line ownership:
1.
2.
3.
4.
5.
6.
7.
Access the Programming Main Menu:
a.
b.
c.
d.
Press [
Intercom
] [
7
] [
7
] [
7
] or the programmed VMMsgs button.
Press [
9
] [
9
] [
#
].
Enter the Password and press [ # ].
Press [
9
].
The system plays the system programming options.
Press [
6
] for line ownership.
The system plays:
To scan line ownership, press 2; to assign line
ownership, press 4; to modify line ownership, press 6.
To delete line ownership, press * D.
Press [
6
].
The system plays:
Please enter the CO line number followed by #.
If finished, press * #.
Enter the number of the outside line whose ownership you want to modify
followed by [
#
].
If the line does not have an owner, the system tells you so. Otherwise, the
system plays:
CO line X owner is mailbox YY. Enter the mailbox
number of the new line owner followed by #. If
finished, press * #.
Enter the new mailbox number followed by [ # ].
The system plays:
CO Line X owner is mailbox YY.
If the mailbox does not exist, you are told so. See “Creating a Mailbox”
earlier in this chapter for instructions on creating mailboxes.
Repeat Steps 4 and 5 to modify the line ownership for any other lines.
Press [
★
] [
7
] to return to the Programming Main Menu or hang up to quit.
5-56