Filter
Top Products
Initial Programming
8.
Do one of the following:
9.
10.
11.
12.
13.
14.
15.
16.
17.
—
If you chose Selector Code Transfer in Step 7, enter the extension,
Hunt Group, or Calling Group number specified in Column C of
Form 3. This value corresponds to the Selector Code entered in
Step 5. Then, press [
# ]. Go to Step 10.
— If you chose Announcement in Step 7, enter the Announcement
number (1 or 2) specified in Column C of Form 3A. This value
corresponds to the Selector Code entered in Step 5. Go to Step 9.
To record an Announcement, lift the handset, press [
1 ], and record the
Announcement from Form 3A. Press [
1 ] after recording.
Repeat Steps 5 through 8 for each Selector Code for which there is
information in Column C.
Press [
★
] [
#
] to approve your entries and finish modifying the Menu
Definition.
If you do not want to record a Day Menu Prompt or Announcement,
press [
# ] to approve the Menu Definition and go to Step 16.
To record a Day Menu Prompt, lift the handset, press [
1 ], and record the
Menu Prompt from Form 4. Press [
1 ] after recording.
Choose an option or skip this step:
—
Press [
2
] [
1
] to immediately re-record this Menu Prompt or
Announcement. Begin recording immediately after the beep; press [ 1 ]
after recording. Repeat, if desired.
—
Press [
2
] [
3
] to play back this Menu Prompt or Announcement.
—
Press [
★
] [
3
] to delete this Menu Prompt or Announcement and return
to Step 12 to be prompted for re-recording.
Press [
★
] [
#
] to approve and save the Menu Definition, the Day Menu
Prompt, and any Announcements.
Press [
★
] [
7
] to return to the Programming Main Menu.
Continue with “Night Menu Prompt” or go to the section, “Voice Mail
Service.”
4-9