Filter
Top Products
Programming Flowchart
START
REFER to CS Form B1 to identify the
extensions for the PARTNER MAIL VS
system.
V1
Use Hunt Group Extensions (#505) to
assign the PARTNER MAIL VS
extensions to Hunt Group 7.
C1
V2
V3
Use Transfer Return Extension
(#306)* to specify extension 10 as the
transfer return extension for each of
the PARTNER MAIL VS extensions.
C2
V3
Go To A
A
REFER to VMS Form 1 to see if the
Yes
Modify the Language Mode.
system should be programmed for
Bilingual Mode.
No
REFER to VMS Form 1 to see if a
REFER to VMS Form 1 to see if a
different Primary Language is
specified. If so, modify the Primary
Language.
different System Language is specified.
If so, modify the System Language.
REFER to VMS Form 1 to see if a
Go To B
different Secondary Language is
specified. If so, modify the Secondary
Language.
Go To B
Key:
●
CS –
Refers to the System Planner
forms for the
Communications System.
●
VMS –
Refers to the forms for the
Voice Messaging System.
●
C# –
Refers to the quick reference
programming procedure for
the Communications System.
●
V# –
Refers to a quick reference
programming procedure for
the Voice Messaging System.
Note: C#/V# procedures follow this
flowchart.
* In some countries, the procedure code for Transfer Return Extension is #309. Check the Programming and Use guide for the communications
system.