Filter
Top Products
Programming Flowchart
D
Refer to CS Form A, Page 1 of
Use Group Call Distribution (#206)*
2, Line Coverage to see if VMS-
Yes
to assign VMS-AA lines to Hunt
AA is specified for any lines.
Group 7.
C3
No
Go To E
Refer to CS Form A, Page 2 of
2, to check VMS Hunt Delay and
VMS Hunt Schedule settings for
the PARTNER MAIL VS system.
●
Go To E
Go To E
No
●
Leave VMS Hunt Delay (#506) at
factory setting (Immediate)
If
Immediate
and
Day Only
are
Yes
●
Set VMS Hunt Schedule (#507) to
checked, this site uses immediate
Day Only
call handling only during the day.
●
Program a Night Service Button
(#503) at extension 10
●
Set Automatic Extension Privacy
(#304) to Assigned for the VMS
extensions.
No
●
●
C9
If
Immediate
and
Always
are
Yes
checked, this site uses immediate
call handling all the time (day and
Leave VMS Hunt Delay (#506) at
factory setting (Immediate)
Leave VMS Hunt Schedule (#507) at
factory setting (Always)
●
Program a Night Service Button
(#503) at extension 10
Set Automatic Extension Privacy
(#304) to Assigned for the VMS
extensions.
C10
night).
●
Set VMS Hunt Delay (#506) at
No
Delayed
●
Leave VMS Hunt Schedule (#507) at
If Delayed and Always are
Yes
factory setting (Always)
checked, this site uses delayed
●
Program a Night Service Button
call handling all the time (day
(#503) at extension 10
and night).
C5
C9
C6
Go To E
C9
C10
If Delayed and Day Only are
Yes
checked, this site uses delayed
call handling only during the day.
No
●
●
●
Set VMS Hunt Delay (#506) to
Delayed
Set VMS Hunt Schedule (#507)
to Day Only
Program a Night Service
Button (#503) at extension 10
C6
Go To E
C9
C10
If
Immediate
and
Night Only
are
Yes
●
Leave VMS Hunt Delay (#506) at
checked, this site uses immediate
factory setting (Immediate)
call handling only during the night.
●
Set VMS Hunt Schedule (#507) to
Day Only
●
Program a Night Service Button
(#503) at extension 10
●
Set Automatic Extension Privacy
(#304) to Assigned for the VMS
extensions.
No
C6
Go To E
C9
C10
If
Delayed
and
Night Only
are
Yes
●
Set VMS Hunt Delay (#506) to
checked, this site uses delayed
Delayed
call handling only during the night.
●
Set VMS Hunt Schedule (#507)
to Night Only
●
Program a Night Service
*
In some countries, the procedure code for Group Call Distribution is #205. Check
Button (#503) at extension 10
the Programming and Use guide for the communications system.
C5
Go To E
C6
C9