Filter
Top Products
System Management
Scanning Line Ownership
To review the current owners of outside lines:
1.
2.
3.
4.
5.
6.
Access the Programming Main Menu:
a. Press [
Intercom
] [
7
] [
7
] [
7
] or the programmed VMMsgs button.
b.
Press [
9
] [
9
] [
#
].
c.
d.
Enter the Password and press [ # ].
Press [
9
].
The system plays the system programming options.
Press [
6
] for line ownership.
The system plays:
To scan line ownership, press 2; to assign line
ownership, press 4; to modify line ownership, press 6.
To delete line ownership, press * D.
Press [
2
].
The system plays:
Please enter the CO line number followed by #, or
press # for the next line owner.
Enter a specific outside line number followed by [ # ], or press [ # ] for the
first outside line number that has been assigned an owner.
The system responds as follows:
—
If you entered a line number followed by [
# ], the system tells you
whether or not an owner is assigned.
—
If you entered [
# ], the system tells you the mailbox number of the
owner of the first outside line that has an owner.
Press [
# ] to hear the mailbox number for the next outside line that has an
owner.
Press [
★
] [
7
] to return to the Programming Main Menu or hang up to quit.
5-54