Filter
Top Products
System Management
Extension Line Coverage
After assigning Extension Line Coverage, make sure VMS coverage is on for the
extension. See “Automatic VMS Cover” earlier in this chapter or “VMS Cover”
later in this chapter.
Use this procedure to modify the assignment of outside lines for Extension Line
Coverage*.
To assign VMS-MAIL lines specified on Form A, Page 1, Line Coverage, to
specific extensions:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
].
2. Enter System Password, if required.
3.
Press [
#
] [
2
] [
0
] [
8
].
4.
5.
6.
7.
At the Line: prompt, enter the first VMS-MAIL line to be programmed
as indicated by the extension number in the Line Coverage column of
Form A, Page 1.
At the Data: prompt, enter the number of the extension in the VMS-MAIL
column.
To program another line, press [
Next Item
] or [
Prev Item
] until the appropriate
line number displays. Then repeat Step 5.
Press [
Feature
] [
0
] [
0
] to exit programming.
*
This feature is not available on all systems. Check the Programming and Use guide for the
communications system.
5-59