Filter
Top Products
Form A: System Configuration
PAGE
2 of 2
Lucent Technologies
Bell Labs lnnovations
Required for PARTNER Advanced Communications System.
For additional instructions, see pages 3 and 4.
8.
9.
System Settings. Write response on line for each item.
●
Receptionist answers calls during business hours? Write “Yes” or “No”
.
●
Number of Lines {#104}—By default, 3 lines per PARTNER ACS processor module, 2 lines
per 206 module and 4 lines per 400 module are assigned to each extension. Write
number if different from default
.
●
Transfer Return Rings {#105}—By default, a transferred call rings 4 times before going
to the transfer return extension. Write number (0-9, 0 = no return) if different from
default .
●
Outside Conference Denial {#109}—By default, a conference call can include 2 outside
parties. Write “No” if 2 outside parties are not allowed
.
●
VMS Cover Rings {#117}—By default, a call rings 3 times before going to the user’s
mailbox. Write number (1-9) if different from default
.
●
Ring on Transfer {#119}—By default, the caller hears ringing when the call is transferred.
Write “NA” if Music on Hold or silence is desired .
●
Toll Call Prefix {#402}—By default, 0 or 1 must be dialed before the area code for a
long distance call. Write “No” if 0 or 1 is not required
.
●
System Password {#403}—By default, no password is programmed to override
dialing restrictions and to turn Night Service on and off. Write 4 digits if password is
desired .
●
Star Code Dial Delay {#410}—By default, the system inserts a 0 second delay after a valid
Central Office star code when it autodials. Write number (1–5) of seconds if a longer delay
is desired or “NO” if this feature should not be active
.
●
Music on Hold {#602}—By default, the Music on Hold jack on the processor module is
active. Write “No” if the jack is deactivated
.
Line Coverage.
If VMS-AA is checked on Form A, Item 7, specify the following:
●
VMS Hunt Delay {#506}—By default, VMS answers calls after 2 rings. Write “Del” if calls
ring 4 times before VMS answers
.
●
VMS Hunt Schedule {#507}— By default, VMS is on all the time. Check if Day only or
Night only is desired:
❑
Day only
❑ Night only
Auxiliary Equipment (System). Check if applicable:
❑
❑
❑
❑
❑
❑
❑
❑
Battery Backup
Caller ID Devices
Loudspeaker Paging: Number of zones
Magic on Hold (Music on Hold {#602} must be active.)
Uninterruptible Power Supply
SMDR. If checked, specify the following if appropriate:
●
SMDR Record Type {#608}—By default, all calls are included on call reports. Write “Out”
if only outgoing calls are reported
.
●
SMDR Output Format {#610}—By default, up to 15 digits are printed for dialed
numbers in the Number field of the call report. Write “24” if a maximum of 24 digits is
desired
.
PARTNER Contact Closure Adjunct. If checked, write in the number (1-4) below to specify
Operation Type for each Contact Closure as appropriate:
OperationType
{#613}
1 = 1 second on
2 = 3 seconds on ( ✔ )
3 = 5 seconds on
4 = Toggle
Contact
Contact
Closure 1
Closure 1
Backup/Restore PC Card. If checked, write “Active” if Automatic System Programming
Backup {#123} is desired .
Notes: Write any additional information that you want to communicate to the installer.
10.
11.
12.
Installation Date
13.
Order Nos.
14.
Sales Support Representative’s Name
Telephone No.