Filter
Top Products
E
Refer to CS Form A, Page 1 of 2, Line
Yes
Use Group Call Distribution (#206)* to
Coverage to see if any lines are
program the personal lines as VMS
checked off in the VMS-Mail column.
Line Coverage for Hunt Group 7.
C3
Refer to VMS Form 6, Columns A and
D to assign Line Ownership to
specified lines.
V24
No
Refer to CS Form A, Page 1 of 2, Line
Yes
Use Line Coverage Extension (#208)
Coverage to see if any extension to program line ownership for those
numbers are specified in the VMS-
extensions.
Mail column.
C4
No
Refer to CS Form B2 to determine if
Yes
Assign Automatic VMS Cover (#310)
Automatic VMS Cover (#310) is
to those extensions.
assigned for any extensions.
C7
No
Refer to CS Form A, Page 2 of 2, to
Yes
Use VMS Cover Rings (#117) to
see if a different number of VMS
program the number of rings.
Cover Rings (#117)
†
is specified.
C8
No
Refer to CS Form C to determine if a
Yes
Program a VMS Cover button on
VMS Cover button is specified for any
the system phone at those
extensions.
extensions.
C11
No
Refer to CS Form C to determine if a
Yes
Program a Do Not Disturb button on
Do Not Disturb button is specified for
the system phone at each of those
any extensions.
extensions.
C12
No
Refer to CS Form C to determine if a
Yes
Program a Voice Mailbox Transfer
Voice Mailbox Transfer button is
button on the system phone at those
specified for any extensions.
extensions.
C13
No
Program a Voice Mail Messages
button on all subscribers’ system
phones for one-touch access to the
voice messaging system.
C14
No
*
Test the system (See Ch. 4.).
In some countries, the procedure code for Group Call Distribution is #205. Check the
Programming and Use guide for the communications system.
†
VMS Cover Rings (#117) may not be available on your system. Check the Programming and
Use guide for the communications system.