Filter
Top Products
PARTNER MAIL VS
®
System Programming Reference
To Program the Communications System for PARTNER MAIL VS
Place the Programming Overlay on the dial pad of the system display phone at extension 10*
TO START CENTRALIZED
TELEPHONE PROGRAMMING
PRESS [ Feature ] [ 0 ] [ 0 ]
PRESS [ System Program
] [ System Program ]
PRESS [ Central Tel Program ]
DIAL
the extension number to be
programmed
Buttons on which lines are assigned for the
extension light up to show the current Line
Ringing setting; remaining buttons can be
programmed with Auto Dial numbers or
features.
TO PROGRAM ANOTHER FEATURE
TO ERASE A FEATURE OR AUTO
AT THE SAME EXTENSION
DIAL BUTTON
After you program one feature, continue
PRESS the programmed button
with the instructions in the box for the
PRESS [ Mic ]
next feature.
TO END CENTRALIZED TELEPHONE
TO CHANGE SETTINGS FOR
PROGRAMMING
ANOTHER EXTENSION
PRESS [ Feature ] [ 0 ] [ 0 ]
PRESS [ Central Tel Program ]
DIAL
the new extension’s number
VMS COVER
VOICE MAILBOX TRANSFER
PRESS a programmable button with
PRESS a programmable button
lights
PRESS [ Feature ] [ 1 ] [ 4 ]
††
PRESS [ Feature ] [ 1 ] [ 5 ]
†
C13
C11
C14
DO NOT DISTURB
PRESS a programmable button with
lights
PRESS [ Feature ] [ 0 ] [ 1 ]
VOICE MAIL MESSAGES AUTO DIAL
BUTTON
PRESS a programmable button
PRESS left [ Intercom ]
DIAL
[ 7 ] [ 7 ] [ 7 ]
C12
= Button with Lights Required
*
†
††
Some systems allow programming from extension 11. Check the Programming and Use guide for the communications system.
In some countries, the procedure code for Transfer Return Extension is #309. Check the Programming and Use guide for the communications
system.
In some countries, the procedure code for Group Call Distribution is #205. Check the Programming and Use guide for the communications system.