Filter
Top Products
Chapter 1 Introducing the Business Communications Manager 59
Installation and Maintenance Guide
BCM1000 LEDs
A line of 10 operational LEDs display on the face of the BCM1000. Refer to Figure 11. These
LEDs show the current state of various hardware components.
Figure 11 BCM1000 operational LEDs
These LEDs monitor:
• power ( )
• disk drive ( )
•system status ( )
• five PCI power indicators
• temperature ( )
•fans ( )
The LED states are described in Table 26 on page 141.
The Unified Manager contains a monitoring tool, that allows you to determine the current
condition of the LEDs from your computer. Refer to “Using the System Status Monitor to monitor
LEDs” on page 212.
Note: These LEDs correspond to the cards, not to the PCI slots.
For example, a WAN card uses only one PCI slot, but has the capacity for two
connections. In this case, both LEDs stay lit as long as a WAN card is present.
Operational LEDs
FanTemperaturPCI DevicesStatusDiskPower Temperature
1
PCI devices