Filter
Top Products
108 Chapter 5 Installing the BCM1000
P0993298 02
Installing the BCM1000 on a flat surface
You can install the BCM1000 on any flat surface that can support the weight of the unit.
To install the BCM1000 on a table or shelf:
1 Attach four rubber feet to the corners on the bottom of the base unit.
2 Position the BCM1000 on the table or shelf. Make sure you leave enough space around the
unit for ventilation and for access to the power and system cables and to the media bay
modules.
Replacing your BCM1000 hardware
If you need to replace your BCM1000, which would be the case if the motherboard or MSC
became inoperable, you will need to regenerate all your keycodes to reflect the new system
identification, and enter them again after you perform your system data restore. Refer to the
Business Communications Manager Programming Operations Guide for a description of
performing a data restore from your BRU backup disks.
Caution: Refer to “Environment checklist” on page 99 for acceptable environmental
conditions before selecting a location for the BCM1000.