Filter
Top Products
2
P0993298 02
Copyright © 2002 Nortel Networks
All rights reserved. December, 2002.
The information in this document is subject to change without notice. The statements, configurations, technical data, and
recommendations in this document are believed to be accurate and reliable, but are presented without express or implied
warranty. Users must take full responsibility for their applications of any products specified in this document. The
information in this document is proprietary to Nortel Networks NA Inc.
Trademarks
NORTEL NETWORKS and Business Communications Manager, are trademarks of Nortel Networks NA Inc.
Microsoft, MS, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Symbol, Spectrum24, and NetVision are registered trademarks of Symbol Technologies, Inc.
All other trademarks and registered trademarks are the property of their respective owners.
North American Regulatory Information
Safety
Business Communications Manager equipment meets all applicable requirements of both the CSA
C22.2 No. 950-95 and UL-1950 Edition 3.
Danger: Risk of shock.
Read and follow installation instructions carefully.
Ensure the Business Communications Manager base unit and Business Communications
Manager expansion unit are unplugged from the power socket and that any telephone or
network cables are unplugged before opening the Business Communications Manager
base unit or Business Communications Manager expansion unit.
If installation of additional hardware and /or servicing is required, disconnect all telephone
cable connections prior to unplugging the Business Communications Manager.
Ensure the switch located on the back of the housing, on the power supply, is set to the
correct input voltage (115 or 230).
Ensure the Business Communications Manager base unit and Business Communications
Manager expansion unit are plugged into the wall socket using a three-prong power cable
before any telephone cables are connected.