Filter
Top Products
165
Installation and Maintenance Guide
Chapter 11
Installing telephones and peripherals
You can add telephones and peripherals before or after you initialize your system.
Telephone configurations are determined by which station module you are using, and what DS30
channel settings you chose for the module. Refer to Chapter 2, “Telephony hardware,” on page 69,
Chapter 4, “Selecting the media bay modules for your system,” on page 91, and Chapter 7,
“Setting media bay module DIP switches,” on page 115.
The system creates default settings for the telephone DN records when it is first initialized. The
settings are based on which telephony profile you choose when you run the Quick Start Wizard. To
change these settings, use the Unified Manager application, System DNs headings. Specific
instructions for configuring telephone operation through the Unified Manager are contained in the
Business Communications Manager Programming Operations Guide.
System telephones
The Business Communications Manager system supports a number of analog, digital, IP telephony
and cordless telephones. Refer to “Telephones and adapters” on page 83 for a description of these
telephones.
Analog telephones are supported either through analog modules (ASMs) or by connecting to a
digital module through an Analog Terminal Adapter 2 (ATA2).
Documentation describing installation and set features is supplied with each piece of equipment.
Analog terminal adapter
The Analog Terminal Adapter 2 (ATA 2) connects a standard analog voice device or data
communication device to a digital line connector on a media bay module on the BCM1000.
Refer to Chapter 13, “Installing Analog Terminal Adapters,” on page 197 for the requirements and
procedure for installing the device.
Note: Programming occurs on the set when the Business Communications Manager
recognizes the set on the system.
Caution: Do not use telephones as off-premises extensions (OPX)
Digital and analog telephones must not be installed on any connections not protected by
building equipment.