Filter
Top Products
202 Chapter 13 Installing Analog Terminal Adapters
P0993298 02
Figure 79 ATA 2 back view
Determining the ATA 2 extension number
You must determine the extension number for every ATA 2 before you can perform administration.
1 Connect a single-line telephone to the ATA 2.
2 Lift the handset.
3 If you do not hear dial tone, press LINK 9 to access an intercom line.
4 Dial the extension number of an Business Communications Manager telephone with a display.
If you hear a busy signal, repeat steps 3 and 4 using a different extension number.
5 When the telephone rings, the display shows: Set <nn> calling.
6 The number that appears on the display is the ATA 2 extension number. Record the extension
number.
Note: LINK appears as RECALL on some telephones. If you are using a telephone
without a LINK or RECALL button, refer to the ATA 2 User Guide for details.
Some phones have a Flash button, which is the equivalent to LINK or RECALL.
Note: The Automatic Set Relocation feature works with ATA 2.
Mounting keyhole slots