Filter
Top Products
262 Chapter 20 Replacing data cards and processing hardware
P0993298 02
Removing a data card
Five LEDs on the front of the BCM1000 indicate PCI card status. LAN cards can be inserted any
of the first three PCI slots. Refer to Figure 132.
Table 49 lists the various LED states.
Figure 132 BCM1000 LAN card LEDs
Note: There are four possible profiles for data card placement in the BCM1000.
Figure 132 shows the configuration for profile 1. Note that the WAN card is connected to
the first two PCI LEDs.
If the data card placement on your base unit differs, ensure that you replace the cards in the
same slots they were removed from. Not all systems can support all cards.
Table 49 BCM1000 PCI LED states
LED
Label
Description Green LED On Green LED Flash Green LED Off
1 PCI Device/
WAN Port #1
Device is present. Driver is active Driver is not running Device is not present.
2 PCI Device/
WAN Port #2
Device is present. Driver is active Driver is not running Device is not present.
3 PCI Device Device is present. Driver is active Driver is not running Device is not present.
4 PCI Device Device is present. Driver is active Driver is not running Device is not present.
5 PCI Device Device is present. Driver is active Driver is not running Device is not present.
Note: The MSC is not field-replaceable
PCI Device s