Filter
Top Products
Chapter 17 Replacing the hard disk 225
Installation and Maintenance Guide
4 Remove the four screws holding the hard disk bracket to the BCM1000. Refer to Figure 93
and Figure 94.
Figure 93 Hard disk wiring (single disk) and screw locations (2.0 hardware)
Figure 94 Hard disk and screw locations (2.5 version hardware)
Note: If you are upgrading to a mirrored disk system, remove the power cables from the
media bay module housing, as well.
Power supply
Arrows show bracket
screw locations
Power supply
Arrows show bracket
screw locations