Filter
Top Products
Page 84 of 504 Attendant consoles
553-3001-367 Standard 3.00 August 2005
3 Press the octothorpe (#) to exit and return to Diagnostics menu 1.
End of Procedure
Procedure 18
Testing the Busy Lamp Field/Console
Graphics Module
Use this procedure to check the functionality of the BLF/CGM. Once in this
menu, the dial pad is in CGM mode. When any dial pad keys are pressed,
except the octothorpe (#) key, the keys are echoed on the BLF/CGM.
1 From Diagnostics menu 1, press 5.
2 Press keys from 0 – 9 and the asterisk (*) on the dial pad. Check the CGM
to see that they are echoed.
3 Press the octothorpe (#) to exit and return to Diagnostics menu 1.
Note: For more information on installation and operation of this feature,
see “Busy Lamp Field/Console Graphics Module” on page 32, or refer to
the Busy Lamp Field/Console Graphics Module User Guide.
End of Procedure
Procedure 19
Checking the Alerter
Use this procedure to check the pitches and volume levels of the alerter and
auxiliary tone channel.
1 From Diagnostics menu 1, press 6.
2 Follow these instructions in any order:
Press key 1 to turn the buzz and auxiliary tones ON.
Press key 2 to turn the buzz and auxiliary tones OFF.
Press key 3 to increase the pitch of the buzz and auxiliary tones.
Press key 4 to decrease the pitch of the buzz and auxiliary tones.
Press key 5 to increase the volume of the buzz and auxiliary tones.
Press key 6 to decrease the volume of the buzz and auxiliary tones.
3 Press the octothorpe (#) to exit and return to Diagnostics menu 1.
End of Procedure