Filter
Top Products
Page 444 of 504 Appendix D: M2317 telephone
553-3001-367 Standard 3.00 August 2005
Alphanumeric display screen
The M2317 telephone is equipped with a two-line (40 characters per line
capacity) LCD screen. The 155 x 15 mm (6 x 0.6 in) LCD screen has a
capacity of 80 characters (two lines of 40 characters each). The first line
displays date and time during the idle state, incoming call identification,
feature icons, user prompts, and messages. The second line displays the labels
for the soft keys (seven characters per key).
Handsfree key
When Handsfree is on, a user can talk to another party without lifting the
handset. Handsfree can be activated by pressing the Handsfree/Mute key, or
by pressing a DN key without lifting the handset. The Handsfree/Mute LCD
indicator shows the status of the Handsfree. Once Handsfree is activated, it
can be deactivated by picking up the handset or by pressing the Release (RLS)
key.
Handsfree operates as if an off-hook operation had been performed. For
example, when the telephone is idle, pressing the Handsfree/Mute key turns
on the Handsfree and selects a DN (depending on line selection as assigned
through COS), enabling the user to make a call. When a call comes into an
M2317 and the set is ringing, pressing the Handsfree/Mute key turns on the
Handsfree and enables the user to answer the incoming (ringing) call
(depending on COS-assigned line selection) without picking up the handset.
The M2317 provides independent volume adjustments for Handsfree,
handset, and alerting tone volumes (on-hook dialing and buzz). For detailed
information on adjusting the volume, refer to the M2317 Quick Reference
Card.
LCD indicators
LCD indicators support the following four key/LCD states:
Function LCD state
idle off
active on (steady)