Nortel Networks M3110 Telephone User Manual


 
Attendant consoles Page 79 of 504
Telephones and Consoles Description, Installation, and Operation
Figure 18
PC Console Interface Unit
M2250 feature key modes
Functions shown for some of the feature keys in Table 3 page 51 vary
depending on which console mode is in effect while the key is being pressed.
Table 10 on page 80 lists the various alternate feature key functions.
When a feature key is pressed while the attendant console is in a mode other
than normal or Level 1, nothing happens.
When in the normal call processing mode, access the Level 1 mode by
pressing the Shift key. The LCD indicator beside the shift key lights and
remains on throughout all options and menus. It goes out only upon return to
normal call processing. All call processing keys that do not have a dual
function perform normally while the console is in Level 1 mode. Press the
Shift key again to return to normal call processing.
On the M2250 attendant console, press the pound (#) key to exit from any
submenu from the Options menu, or from the Diagnostics menu to normal
operating mode. Press the Shift key to return to the Level 1 mode.
Level 1 mode also provides access to additional call processing features, as
well as to options and maintenance features. One of the additional call
processing features is access to Trunk Group Busy (TGB) keys that are
locked out in normal mode. For example, in normal mode, there are ten
brandline
insert
headset/handset
volume control
Status LED
alerter speaker
553-AAA0576