Filter
Top Products
Page 140 of 504 M 3900 description
553-3001-367 Standard 3.00 August 2005
at that telephone. The calls to the user’s primary DN are routed to the Virtual
Office Host Terminal where the Virtual Office worker is logged in.
For further information on Virtual Office, refer to “M3900 (single site)
Virtual Office” on page 173.
Full Icon Support
The M3900 Full Icon Support feature enables distinct icons and flashing
cadences for the display of different call states. These icons are displayed for
the Directory Number (DN) keys on the Phase II and Phase III M3903 and
M3904 telephones, as well as the Phase III M3905 telephones.
The M3900 Full Icon Support feature requires a minimum of Release 9 of the
Key-Based Accessory module (KBA).
The icons also display on the Key-Based Accessory module and the
Display-Based Accessory module. This feature allows the user to quickly
determine the call state of a DN, instead of viewing just the flashing cadence
of a single generic icon to determine the call state.
The functions displayed with the Full Icon Support feature are: I-Ringing,
I-Active, U-Active, I-Hold, and U-Hold. The icons appear on the LCD
displays located next to the DN keys. The scenarios for these icons are as
follows:
• I-Ringing: The I-Ringing icon is displayed on the ringing DN of a set
that is being called.
• I-Active: The I-Active icon is displayed on DNs on telephones in the
active call state.
• U-Active: The U-Active icon appears on the MADN of a set when
another set on the MADN is in the active call state.
• I-Hold: The I-Hold icon appears on the DN of the set that has a call on
hold.
• U-Hold: The U-Hold icon appears on the MADN of a set when another
set on the MADN has a call in the hold state.