Filter
Top Products
Appendix C: Meridian Modular Telephones add-on modules installation Page 373 of 504
Telephones and Consoles Description, Installation, and Operation
Meridian Modular Telephones
Use the procedures in this section for adding hardware options to the M2006,
M2008/M2008HF, M2016S, M2616, and M2216ACD telephones only.
Figure 65 on page 374 shows an exploded view for reference when
dismantling the telephone to get to its internal components. Some telephone
types are slightly smaller than the M2616 and do not have the center screw in
the base, but otherwise they are the same. The center screw may not be
required.
Refer to Figure 71 on page 395 to locate the various components of the
M2006 and M2008/M2008HF telephones. Refer to Figure 72 on page 396 to
locate components on the M2616, M2016S, and M2216ACD telephones.
CAUTION
Damage to Equipment
Use only the line cord provided with the Meridian
Modular Telephone when installing and removing
options. The acceptable line cord is A0346862.