Filter
Top Products
Page 202 of 504 M3900 installation and configuration
553-3001-367 Standard 3.00 August 2005
The Page button allows you to scroll to each key layer. The soft-labeled field
is 10 characters in length. You can customize the DBA labels using the
program mode and the dial pad keys.
Use Procedure 39 to install the DBA.
Procedure 39
Installing the DBA
1 While depressing the telephone tilt handle, pull the telephone away from
the footstand until it clears the final stop. Gently pull the footstand off the
clips.
2 Place the telephone and the DBA face down on a padded level surface,
and align them.
3 Lower the DBA into place, and insert the 10-pin plug on the Module into
the 10-pin slot on the telephone. Push in gently until the retaining tabs
snap into place.
4 Insert the clips on the telephone into the hinges on the footstand, then
press on the front of the footstand until it snaps into place.
5 While depressing the telephone tilt handle, swing the footstand into the
desired position, then release the handle.
6 Carefully turn the new assembly upright.
Installing the handset option for the M3905 Call Center
Telephone
A handset does not accompany the M3905 Call Center Telephone. The
Handset Kit is a hardware option for the M3905 Call Center Telephone, and
includes a handset, cord, and add-on handset cradle. The handset can be
added to the M3905 by removing the front plate of the telephone.
Note: Nortel recommends that a systems administrator or technician
complete this installation.