Filter
Top Products
Appendix A: Meridian Modular Telephones Page 325 of 504
Telephones and Consoles Description, Installation, and Operation
Software requirements
The option number for the Meridian Modular Telephones is 170. The
mnemonic is ARIE. The DSET package (88) and the TSET package (89) are
required.
Intelligent Peripheral Equipment requirements
The telephones interface with the DLC. The DLC supports eight Integrated
Voice and Data ports; each port supports one data and one voice channel. A
voice TN and a data TN are assigned in the software.
General description
This section describes the various features and capabilities of the following
Meridian Modular Telephones.
M2006 — A single line telephone with 6 programmable function keys.
See Figure 51 on page 326.
M2008/M2008HF — A multi-line telephone with 8 programmable function
keys. The M2008HF contains an integrated Handsfree unit. See Figure 52 on
page 327.
M2616 — A high performance multi-line telephone with 16 programmable
function keys and integrated Handsfree unit. See Figure 53 on page 328.
M2216ACD-1 — A multi-line telephone for ACD operations. It has 15
programmable function keys, a special ACD Display Module and two RJ-32
jacks for modular electret headsets. See Figure 56 on page 339.
M2216ACD-2 — A multi-line telephone for ACD operations. It has 15
programmable function keys, and a special ACD Display. It is similar to
model 1, but with one PJ-327 jack for a carbon agent headset and one RJ-32
jack for an electret supervisor headset. See Figure 56 on page 339.
Note: If a headset is desired for the M2216ACD sets, the amplified type
is strongly recommended.